Quick Start

Veronte Ops is an application for the operation and monitoring of the vehicle during the mission.

Veronte Ops includes:

  • Telecommand: Support for all synchronous operator control commands that can be sent to the flight segment, e.g. operational mode switch, mission management, payload control.
  • Mission design: Configuration of user-defined, pre-defined mapping and launch missions, as well as in-flight mission editing.
  • Operation parameters: Configuration of operation parameters, such as theirs values, positions and directions, which may vary depending on the mission and during the mission.
  • Workspace: User can get feedback on autopilot variables and status through widgets.
  • Multiple users: One or more operators can work simultaneously.

System requirements

Before executing this software, users should check the following sections with the minimum and recommended PC hardware requirements.

Minimum

  • CPU: Intel Core i5-8365UE
  • RAM: 8 GB DDR4
  • STO: 256 GB SSD
  • CPU: Intel Core i5-1235U (10C/DecaCore 1.3 / 4.4GHz, 10MB)
  • RAM: 8 GB DDR4
  • STO: 512 GB SSD M.2 NVMe PCIe

Software Requirements

Compatible browsers

The following are the functional, optional and unsupported browsers for use with Veronte Ops software:

  • Functional: Chrome
  • Optional: Firefox, Edge

Window Size

In order for the application and all its features to display correctly, check the following minimum and maximum sizes for the application window:

  • Minimum: 1024x768
  • Maximum: No limit

Operating System

  • Recommended: Windows 11
  • Supported: Windows 10

Important

Some of the latest features of this application may not be compatible with Windows 10.

Download and Installation

There are 2 ways to work with this application: as a website app or installing it through an executable.

Hint

The executable version might be useful for some users because:

  • No internet connection is required, i.e. for users who need to work offline.
  • No automatic updates are carried out.
  • Users do not need to have a browser installed.
  • The application does not depend on the browser.

Executable

If users wish to work with the executable app, Veronte Ops software is available on the Veronte Toolbox platform for downloaded and installation. For more information, please refer to the Veronte Toolbox user manual.

A personal account is required to access Veronte Toolbox; create a Ticket in the user's Joint Collaboration Framework and the support team will create it for you.

Firewall Configuration

Users must enable UDP ports 51017 and 51018 (default ports) in the firewall to ensure the correct operation of the connection between Veronte Ops and Veronte Link.

Note

This configuration might need to be performed by the cybersecurity manager of your company.

© 2026 Embention. All rights reserved.